Skip to content
Eventdex

Event Check-In Checklist for the First Hour of Doors

Event Check-In Checklist for the First Hour of Doors

Most of an event's check-in happens in the first hour. Attendees arrive in a wave just before the opening session, and the line they stand in is the first thing they experience. If it moves, nobody remembers it. If it stalls, it becomes the story people tell about your event for the rest of the day.

This checklist covers that first hour: what to test before the doors open, how to set up the line, and what to watch while it is moving. It assumes you already have a registration list and a check-in tool. If you are still choosing one, our event check-in software page explains how the pieces fit together.

Two hours before doors: test everything with real badges

Do not wait for the first attendee to find out a printer is jammed or a scanner is logged out. Set up every station as if the doors were about to open, and check in a few test registrations from start to finish.

  • Log in to every check-in device and confirm it shows the full, current registration list.
  • Scan a test QR code on each device and confirm the guest is marked as arrived.
  • Print a test badge on every printer and check the name, company and QR code are readable.
  • Load spare badge stock and ribbons next to each printer, not in a box in the back room.
  • Charge every phone and tablet, and put chargers at each station.

Plan for the network to fail

Venue Wi-Fi is at its worst when a few hundred people walk in and connect at once. Assume it will slow down, and make sure check-in does not depend on it.

The Eventdex attendee check-in app can scan and validate tickets offline, and syncs the data back once the connection returns. Before doors, check that each device has the latest list downloaded, and agree who will watch the sync once the rush is over. Ask in a demo how your device count and venue network would work.

One hour before doors: set up the line

A good line layout matters more than the number of staff. Attendees should know which line to join before they reach the front of it.

  • Put clear signs at the entrance, readable from a distance, that say which line is for whom.
  • Separate pre-registered attendees from walk-ins, because walk-ins take longer.
  • Give speakers, sponsors and VIPs their own station if you have the space.
  • Leave room for the line to grow without blocking the entrance or the coffee.
  • Place a staff member at the start of the line to direct people and answer questions.

Eventdex lets several devices use a single login, and one printer can serve several scanners, so you can add stations to split the line without adding printers.

Use self-service where you can

Attendees who already have a QR code rarely need a person to check them in. Self-service stations let them scan and print their own badge, which frees your staff for the guests who need help.

With Eventdex check-in kiosks, attendees check themselves in and print their badge, and walk-ins can register and buy a ticket at the kiosk. You can also set up contactless check-in, where attendees scan a QR code, enter their details on a branded page and print their badge.

At doors: handle walk-ins without slowing everyone else

Walk-ins and people whose registration cannot be found are what slow a line down. Give them a separate place to go, so one complicated case does not hold up twenty simple ones.

  • Send anyone who cannot be found to a help desk, rather than searching at the main station.
  • Register walk-ins and take payment onsite, so they are added to the same list as everyone else.
  • Keep a short script for common problems: a different email, a misspelled name, a colleague's ticket.
  • Have one person with authority to make decisions, such as comping a ticket, at the help desk.

During the first hour: watch the numbers

Somebody on your team should be watching the check-in count, not checking people in. Live numbers tell you where the problem is before the line does.

  • Check how many attendees have arrived against how many registered.
  • Look at which stations are moving and which have stopped.
  • Move staff from a quiet station to a busy one rather than waiting for a break.
  • Tell the stage manager if a large share of attendees is still outside close to the opening session.

Eventdex attendance reports show how many attendees have checked in while the event is running, and which sessions drew the most and fewest people.

Keep badges printing

Printers fail in predictable ways: they run out of stock, a ribbon runs out, or a badge jams. None of these are serious if someone is ready for them.

  • Assign one person to the printers for the first hour, with spare stock and ribbons.
  • Keep at least one spare printer set up and tested, ready to take over.
  • If a printer stops, move its line to another station and fix it out of sight.

Eventdex prints badges on demand on Zebra, Epson and Brother printers. Our page on onsite check-in and badge printing covers the supported sizes and setup.

After the rush: close the loop

Once the line has cleared, take ten minutes to fix what went wrong before the next wave arrives at lunch or the afternoon sessions.

  • Confirm offline devices have synced and the arrival count is accurate.
  • Restock badge stock and ribbons at every station.
  • Note what slowed the line, and what you would change for day two.
  • Thank the check-in team. They had the hardest hour of the day.

For a broader look at the tools behind all of this, read all you need to know about event check-in software.

Frequently asked questions

How early should check-in open before an event?

Open check-in early enough that the first wave of attendees is through before the opening session starts, and test every device and printer at least an hour before that.

How do I speed up event check-in?

Separate pre-registered attendees from walk-ins, add self-service kiosks for people with a QR code, and send anyone who cannot be found to a help desk so they do not hold up the main line.

Can event check-in work without Wi-Fi?

With Eventdex, yes. Tickets can be scanned and validated offline, and the data syncs back once the connection returns.

How should walk-in attendees be handled?

Give walk-ins their own station or kiosk where they can register and pay onsite, so they join the same list as everyone else without slowing the main line.